AmpliPro FAQ
Common questions about AmpliPro, from setting up zones to wiring speakers and getting help.
Common questions about AmpliPro, from setting up zones to wiring speakers and getting help.
A multi-zone audio controller and amplifier for whole-home audio. It plays up to four sources at once, each to one zone or many, and you control it from the mobile apps, the web app or the REST API. Zone Expanders take a system up to 36 stereo zones.
AmpliPro is the hardware. AmpliPi is the open-source software that runs on it, including the web app you use to control the system from any phone or computer on your network.
Everything is open: the software, the firmware and the schematics. The web app and REST API are written in Python and run on a Raspberry Pi compute module inside the box, and the firmware that handles volume and zone switching is written in C. You can read the code on GitHub, build on the API, and ask questions on the community forum. Our blog has guides and integrations.
Each controller has six zones, and each zone drives a pair of speakers down to 4 Ω. Each Zone Expander adds six more, up to 36 zones in one system.
A zone is one area with its own speakers. A group is a set of zones you control together, and a group can include zones on the controller and on any expander. You might make an “Upstairs” group, a “Downstairs” group and a “Whole house” group, for example. Set them up from the settings page (the gear icon at the bottom right of the app).
AirPlay 1 and 2, Pandora, Spotify Connect, DLNA, internet radio, Lyrion Music Server and local media playback, plus FM radio (with an RTL-SDR receiver) and Bluetooth (with a third-party adapter). Lyrion opens up almost any other streaming service.
Each zone has a pair of outputs for 4–8 Ω speakers, on the removable Euroblock connectors that come with the unit. Wire your speaker leads into the connector, matching + and −, then plug it into the zone’s output. Our speaker buying guide covers what to look for.
Yes. Each zone also has line-level RCA (preamp) outputs, which follow the zone’s volume.
Yes, though it’s built for whole-home audio first. For video switching and surround sound in a dedicated theater, you’ll still want an AV receiver.
See the specifications on the controller and expander pages.
Click the gear icon at the bottom right of the app, open Updates, click Check for updates, then click Update if a new release is available.
Check that the source is playing, then try a different source. Check the speaker connections and try another speaker or zone output. Make sure the right input is selected, the volume is up and the zone isn’t muted.
Usually mixed grounds. AmpliPro keeps its analog and digital grounds separate, and the most common mistake is powering a USB device from the rear USB port: power USB devices from a wall outlet instead. Speaker wiring run alongside power lines can also pick up noise. Still stuck? Ask on the forum or email us.
A one-year limited warranty from the day you receive your AmpliPro.
Yes, within 30 days of receipt, in its original condition, for a refund.
Email support@amplipro.com, or ask the community on the AmpliPi forum.